Particle Count Measurement
Air Quality Test - Particle Count Measurement & Particle Size Analyzer
Air Quality Testing is performed to certify or validate the purity class of process gases with reference to ISO 8573-1:2010 or Customer’s requirement which summarises into the following three categories:
- Particle – impurities as small as 0.1 microns
- Water – moisture in the form of pressure dewpoint
- Oil – in the form liquid, aerosol and vapor
Particles, water, and oil in are seen as impurities that will contaminate downstream systems which leads to rejection of end-products and also the early failure of high-end machineries.
Conducting periodic Air Quality Testing will allow early detection of potential problems and at the same time provide peace of mind while maintaining a high-quality production.
- Process Air System within customer specifications.
- Compressed Air System (ISO 8573-1:2020):
Compressed Air Testing is performed for establishing the purify class / validation of process air system using the International Standard ISO 8573-1:2020 which summarises into different classes of Dew Point Measurement, Particle Count Measurement and Oil Mist.
Particle Measuring Systems
Particles varies in sizes present in a Compressed Air System are contaminants that required a long duration and a large amount of purging gas.
A pipeline with high contaminants will contaminate the production floor, hence causing poor quality of products produced. Reduction in particle count leads to a more comfortable environment.
We offer particle count measurement systems for quality particle counting, particle sizing analysis and particle characterization.
Ready to get started? Get in touch with us today!
